dmesg - Glmark2 Bench on Desktop
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Linux version 4.15.7-1-MANJARO (builduser@development) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Wed Feb 28 20:35:31 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x000000007ac5ffff] usable
BIOS-e820: [mem 0x000000007ac60000-0x000000007acacfff] ACPI NVS
BIOS-e820: [mem 0x000000007acad000-0x000000007acb4fff] ACPI data
BIOS-e820: [mem 0x000000007acb5000-0x000000007adf0fff] reserved
BIOS-e820: [mem 0x000000007adf1000-0x000000007adf1fff] usable
BIOS-e820: [mem 0x000000007adf2000-0x000000007ae01fff] reserved
BIOS-e820: [mem 0x000000007ae02000-0x000000007ae0efff] ACPI NVS
BIOS-e820: [mem 0x000000007ae0f000-0x000000007ae37fff] reserved
BIOS-e820: [mem 0x000000007ae38000-0x000000007ae7afff] ACPI NVS
BIOS-e820: [mem 0x000000007ae7b000-0x000000007affffff] usable
BIOS-e820: [mem 0x000000007b800000-0x000000007f9fffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fdfffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Extreme3 Gen3, BIOS P1.30 11/22/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x47fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask F80000000 write-back
2 base 07B800000 mask FFF800000 uncachable
3 base 07C000000 mask FFC000000 uncachable
4 base 080000000 mask F80000000 uncachable
5 base 47FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 16310M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0x7b800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcef0-0x000fceff] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 98000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x47e646000, 0x47e646fff] PGTABLE
BRK [0x47e647000, 0x47e647fff] PGTABLE
BRK [0x47e648000, 0x47e648fff] PGTABLE
BRK [0x47e649000, 0x47e649fff] PGTABLE
BRK [0x47e64a000, 0x47e64afff] PGTABLE
BRK [0x47e64b000, 0x47e64bfff] PGTABLE
BRK [0x47e64c000, 0x47e64cfff] PGTABLE
BRK [0x47e64d000, 0x47e64dfff] PGTABLE
BRK [0x47e64e000, 0x47e64efff] PGTABLE
BRK [0x47e64f000, 0x47e64ffff] PGTABLE
BRK [0x47e650000, 0x47e650fff] PGTABLE
BRK [0x47e651000, 0x47e651fff] PGTABLE
RAMDISK: [mem 0x36f1b000-0x37784fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007ACAD068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007ACB4A10 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007ACAD150 0078BA (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000007AE06F80 000040
ACPI: APIC 0x000000007ACB4B08 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000007ACB4BA0 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x000000007ACB4D78 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 0x000000007ACB4DB8 0000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x000000007ACB4E90 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047fdfffff]
NODE_DATA(0) allocated [mem 0x47fdf4000-0x47fdf6fff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x000000007ac5ffff]
node 0: [mem 0x000000007adf1000-0x000000007adf1fff]
node 0: [mem 0x000000007ae7b000-0x000000007affffff]
node 0: [mem 0x0000000100000000-0x000000047fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047fdfffff]
On node 0 totalpages: 4171651
DMA zone: 64 pages used for memmap
DMA zone: 157 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7784 pages used for memmap
DMA32 zone: 498150 pages, LIFO batch:31
Normal zone: 57336 pages used for memmap
Normal zone: 3669504 pages, LIFO batch:31
Reserved but unavailable: 104 pages
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0x7ac60000-0x7acacfff]
PM: Registered nosave memory: [mem 0x7acad000-0x7acb4fff]
PM: Registered nosave memory: [mem 0x7acb5000-0x7adf0fff]
PM: Registered nosave memory: [mem 0x7adf2000-0x7ae01fff]
PM: Registered nosave memory: [mem 0x7ae02000-0x7ae0efff]
PM: Registered nosave memory: [mem 0x7ae0f000-0x7ae37fff]
PM: Registered nosave memory: [mem 0x7ae38000-0x7ae7afff]
PM: Registered nosave memory: [mem 0x7b000000-0x7b7fffff]
PM: Registered nosave memory: [mem 0x7b800000-0x7f9fffff]
PM: Registered nosave memory: [mem 0x7fa00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7fa00000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u262144
pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 4106310
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16324864K/16686604K available (10252K kernel code, 1255K rwdata, 3236K rodata, 1432K init, 636K bss, 361740K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 31693 entries in 124 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.474 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.94 BogoMIPS (lpj=3392474)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Freeing SMP alternatives memory: 24K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (54279.58 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7ac60000-0x7acacfff] (315392 bytes)
PM: Registering ACPI NVS region [mem 0x7ae02000-0x7ae0efff] (53248 bytes)
PM: Registering ACPI NVS region [mem 0x7ae38000-0x7ae7afff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:36:01, date: 03/05/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF932B6BFE2000 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF932B6B41F500 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x1B active on init
ACPI: Enabled 8 GPEs in block 00 to 3F
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7fa00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0102] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb907000-0xfb90700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb906000-0xfb9063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb900000-0xfb903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb905000-0xfb9053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb904000-0xfb9040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
pci 0000:01:00.0: [10de:1c02] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb800000-0xfb807fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xfb800000-0xfb8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ac60000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7adf2000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
e820: reserve RAM buffer [mem 0x47fe00000-0x47fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x0400-0x0453] has been reserved
system 00:06: [io 0x0458-0x047f] has been reserved
system 00:06: [io 0x1180-0x119f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x7fa00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfb8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8616K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x76c60000-0x7ac60000] (64MB) mapped at [0000000020ca3fdf-00000000fe04f2f3]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=44 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
io scheduler bfq-mq registered
BFQ I/O-scheduler: v8r12 (with cgroups support)
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.0: Signaling PME with IRQ 25
pcieport 0000:00:1c.3: Signaling PME with IRQ 26
pcieport 0000:00:1c.4: Signaling PME with IRQ 27
pcieport 0000:00:1c.5: Signaling PME with IRQ 28
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0x00000000e133948a, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (695060146, 0)->(722924113, -27863967)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 10:527:638
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1432K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 860K
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb906000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.7-1-MANJARO ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.7-1-MANJARO xhci-hcd
usb usb2: SerialNumber: 0000:06:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.7-1-MANJARO xhci-hcd
usb usb3: SerialNumber: 0000:06:00.0
ehci-pci 0000:00:1d.0: debug port 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb905000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.7-1-MANJARO ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
usb 4-1: new high-speed USB device number 2 using ehci-pci
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
usb 2-1: Manufacturer: GenesysLogic
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3392.293 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
usb 3-1: New USB device found, idVendor=05e3, idProduct=0612
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB3.0 Hub
usb 3-1: Manufacturer: GenesysLogic
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 4-1.1: new low-speed USB device number 3 using ehci-pci
usb 4-1.1: New USB device found, idVendor=1bcf, idProduct=0005
usb 4-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1.1: Product: USB Optical Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:1BCF:0005.0001/input/input2
hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
usb 4-1.2: new low-speed USB device number 4 using ehci-pci
usb 2-2: new high-speed USB device number 3 using xhci_hcd
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: ASUS BC-12D2HT, 1.00, max UDMA/100
usb 4-1.2: New USB device found, idVendor=0e6a, idProduct=02c0
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.2: Product: PS/2+USB Keyboard
usb 4-1.2: Manufacturer: dakai
input: dakai PS/2+USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:0E6A:02C0.0002/input/input3
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM ASUS BC-12D2HT 1.00 PQ: 0 ANSI: 5
hid-generic 0003:0E6A:02C0.0002: input,hidraw1: USB HID v1.11 Keyboard [dakai PS/2+USB Keyboard] on usb-0000:00:1d.0-1.2/input0
input: dakai PS/2+USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/0003:0E6A:02C0.0003/input/input4
hid-generic 0003:0E6A:02C0.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [dakai PS/2+USB Keyboard] on usb-0000:00:1d.0-1.2/input1
usb 2-1.3: new full-speed USB device number 4 using xhci_hcd
usb 2-1.3: New USB device found, idVendor=047f, idProduct=d957
usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
usb 2-1.3: Product: Plantronics Wireless Audio
usb 2-1.3: Manufacturer: Plantronics Wireless Audio
input: Plantronics Wireless Audio Plantronics Wireless Audio as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:047F:D957.0004/input/input5
usb 3-1.2: new SuperSpeed USB device number 3 using xhci_hcd
plantronics 0003:047F:D957.0004: input,hiddev1,hidraw3: USB HID v1.11 Device [Plantronics Wireless Audio Plantronics Wireless Audio] on usb-0000:06:00.0-1.3/input3
usb 3-1.2: New USB device found, idVendor=04e8, idProduct=61b6
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: Samsung M3 Portable
usb 3-1.2: Manufacturer: Samsung M3 Portable
usb 3-1.2: SerialNumber: C29E7E010800015F
usb 3-1.2: USB controller 0000:06:00.0 does not support streams, which are required by the UAS driver.
usb 3-1.2: Please try an other USB controller if you wish to use UAS.
usb-storage 3-1.2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 3-1.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 0)
ata2.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4B PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 0:0:1:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sda: sda1 sda2 < sda5 >
sr 0:0:1:0: Attached scsi CD-ROM sr0
clocksource: Switched to clocksource tsc
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-generator[246]: x-systemd.device-timeout ignored for 192.168.87.2:/srv/nfs/Upload
systemd-fstab-generator[246]: x-systemd.device-timeout ignored for 192.168.87.2:/srv/nfs/Film
systemd-fstab-generator[246]: x-systemd.device-timeout ignored for 192.168.87.2:/srv/nfs/Serier
systemd-fstab-generator[246]: x-systemd.device-timeout ignored for 192.168.87.2:/srv/nfs/Musik
systemd-fstab-generator[246]: x-systemd.device-timeout ignored for 192.168.87.2:/srv/nfs/Billeder
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
EXT4-fs (sda5): re-mounted. Opts: discard
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3392294663 Hz
vboxdrv: Successfully loaded version 5.2.8 (interface 0x00290001)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
scsi 4:0:0:0: Direct-Access Samsung M3 Portable 1306 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 33 00 00 08
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
systemd-journald[258]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi device interface
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.25 Wed Jan 24 20:02:43 PST 2018 (using threaded interrupts)
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2017 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
r8168 0000:05:00.0 enp5s0: renamed from eth0
Linux agpgart interface v0.103
random: crng init done
usb 2-2: New USB device found, idVendor=046d, idProduct=082d
usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 2-2: Product: HD Pro Webcam C920
usb 2-2: SerialNumber: E4CF303F
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.25 Wed Jan 24 19:29:37 PST 2018
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
i915 0000:00:02.0: enabling device (0006 -> 0007)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[drm] Memory usable by graphics device = 2048M
checking generic (d1000000 7f0000) vs hw (b0000000 10000000)
[drm] Replacing VGA console driver
i801_smbus 0000:00:1f.3: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.3: Driver SMBus register access inhibited
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 1
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Cannot find any crtc or sizes
Adding 3997692k swap on /dev/sda1. Priority:-2 extents:1 across:3997692k SSDscFS
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
mousedev: PS/2 mouse device common for all mice
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
uvcvideo 2-2:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 2-2:1.0: Entity type for entity Extension 11 was not initialized!
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb2/2-2/2-2:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
usbcore: registered new interface driver snd-usb-audio
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
enp5s0: 0xffff9a06c1a19000, bc:5f:f4:21:e1:ea, IRQ 38
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller _nv001170rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
nvidia-modeset: Allocated GPU:0 (GPU-c3927c31-201d-5682-6091-ea821237aaf2) @ PCI:0000:01:00.0
r8168: enp5s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
ata1.01: failed to enable DIPM, Emask 0x100
ata1.00: hard resetting link
ata1.01: hard resetting link
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
ata1.01: qc timeout (cmd 0xef)
ata1.01: failed to enable DIPM, Emask 0x4
ata1.00: disabling LPM on the link
ata1.01: limiting speed to UDMA/100:PIO3
ata1.00: hard resetting link
ata1.01: hard resetting link
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 frozen
ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Get event status notification 4a 01 00 00 10 00 00 00 08 00res 00/00:00:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
ata1.00: hard resetting link
ata1.01: hard resetting link
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
ata1: EH complete
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
usb 2-2: reset high-speed USB device number 3 using xhci_hcd
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature/speed normal
CPU7: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 38754)
CPU7: Core temperature above threshold, cpu clock throttled (total events = 38754)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 40211)
CPU3: Core temperature/speed normal
CPU7: Core temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU7: Core temperature above threshold, cpu clock throttled (total events = 94672)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 94672)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 97025)
CPU7: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU7: Package temperature/speed normal